About HIRA
Los Angeles Abrasion Machine to Astm Standards as El 42-530/01 or Similar
Rotating-drum abrasion tester (roughly 700mm internal diameter) that tumbles a loaded aggregate samp..
Marshall Compaction Hammer, Manual
This is a hand-operated Marshall compaction hammer used to compact asphalt specimens for mix design ..
Marshall Compaction Mould Complete with Collar Mould + Base Plate + Extension Collar
Three-piece cylindrical steel mould assembly - barrel, removable base plate, and extension collar - ..
Marshall Specimen Extractor, Universal Extruder
Bench-mounted mechanical/hydraulic extruder that pushes a compacted specimen out of its mould via a ..
Maximum and Minimum Thermometer (bs692)
This is a Six's-pattern maximum/minimum thermometer with a U-shaped mercury/alcohol column and slidi..
Measuring Cylinder Set of 25ml, 100ml, 500ml, 1000ml, 2000ml
This is a set of glass graduated measuring cylinders spanning 25ml, 100ml, 500ml, 1000ml and 2000ml ..
Mechanical Dial Gauge 25mm X 0.01mm Divisions
This is a precision analog mechanical dial gauge with 25mm travel and 0.01mm divisions, used across ..
Metal Containers (450mm Dia.)
A 450mm-diameter metal container used for handling and storing soil or aggregate samples in a testin..
Metal Scoop, Large(150mm Wide), Cast Aluminum Handle
This large aluminium sampling scoop has a roughly 150mm wide bowl and a cast handle for a secure one..
Metal Scoop, Medium(100mm Wide), Cast Aluminum Handle
This medium aluminium sampling scoop has a roughly 100mm wide bowl and cast handle, for smaller-volu..
Metal Tamping Rod 16mm Diameter and 450mm to 600mm Length with One End Round
This is a 16mm diameter steel tamping rod, 450-600mm length with one rounded end, used to hand-tamp ..
Metal Tamping Rod 8 Mm Diameter X 300 Mm Long and Metal Measure 115 Mm Dia X 180 Mm Deep for Sodium Sulphate Test Apparatus (bs 812)
This is a hemispherically-ended 8mm diameter x 300mm steel tamping rod paired with a 115mm dia x 180..
Metal Tray 300 X 300mm Square, 40mm Deep, with 150mm Diameter Hole in the Centre
A square metal tray (300 x 300mm, 40mm deep) with a 150mm-diameter centre hole, used to support and ..
Metal Tray 500 X 500mm Square, 50mm Deep, with 200mm Diameter Hole in the Centre
A larger square metal tray (500 x 500mm, 50mm deep) with a 200mm-diameter centre hole, used to suppo..
Metal Tray for Uts-0920
This is the metal tray for the UTS-0920 sand pouring cylinder, a flat plated sheet-steel tray with a..
Moisture Content Tin with Lid, Aluminum, 150mm X 50mm Height
These are 150mm diameter x 50mm height moisture content tins with a close-fitting lid, sized to hold..
Moisture Content Tin with Lid, Aluminum, 50mm X 40mm Height
These are 50mm diameter x 40mm height moisture content tins with a close-fitting lid, sized to hold ..
Moisture Content Tin with Lid, Aluminum, Ø45mm X 10mm Height
This is a shallow, low-profile aluminium sample tin, 45mm diameter x 10mm height, with lid, sized fo..
Moisture Content Tins, 75 Mm Dia, Cadmium or Aluminium Plated
These are 75mm diameter moisture content tins, cadmium or aluminium plated, with a close-fitting lid..
Mortar Mixer
This is a bench-mounted mortar mixer used for batch-mixing mortar, grout, and cement paste to lab st..
