A galvanized metal tray (1.2m x 1.2m x 50mm deep) used for handling and drying larger soil or aggreg..

A set of two mason hammers (1.5kg and 3.5kg) and a 1kg rubber mallet, used for breaking and shaping ..

A 1.5-metre aluminium straight edge used in soil and materials testing labs to check the flatness of..

A 100mm soft-bristle brush used for cleaning sample trays, moulds, and lab equipment.

This is a 100mm steel distance piece that sits between the compression machine's platens to take up ..

This is a 1m x 1m x 75mm deep galvanised metal tray used for spreading, mixing and air-drying bulk s..

A 2.25kg (5lb) split surcharge weight, placed on top of a soil sample in a CBR test mould to simulat..

This is a 2.27kg/5lb set of annular surcharge weights that slip over the mould's centre post, applyi..

2.49kg Compaction hammer, drop regulated to 304.8mm

This solid, perforated 2.8kg base plate fits under the CBR mould in place of the standard drainage b..

This cylindrical wire mesh basket, 200mm diameter with apertures no greater than 6.5mm, holds roughl..

A 200mm x 200mm x 20mm cadmium-plated or aluminium sample tin used for moisture-content and general ..

These are 200mm x 200mm x 50mm deep steel baking trays, used for heating or drying asphalt/aggregate..

A 300mm-diameter, 20mm-aperture BS test sieve used to grade soil and aggregate samples by particle s..

This is a 20mm steel distance piece that sits between the compression machine's platens to take up t..

This is a 3-metre straight-edge with equal end supports plus calibrated graduated wedges, used to me..

This is a 3.5kg hammer with a drop-forged, heat-treated steel head on a fibreglass-cored, soft-grip ..

This is a bench-top centrifuge extractor with a 3000g specimen capacity, driven by a variable-speed ..

4.535kg compaction hammer drop regulated to 457.2mm

This 4.5kg/10lb set of annular surcharge weights slips over the mould's centre post, applying overbu..