Search

An ABS-cased dipper reel with a buzzer/light indicator that activates on probe contact with water, 1..

A steel-cased dipper reel with a stainless probe, 100m graduated cable.

A 100mm soft-bristle brush used for cleaning sample trays, moulds, and lab equipment.

This is a 100mm steel distance piece that sits between the compression machine's platens to take up ..

This 4.5kg/10lb set of annular surcharge weights slips over the mould's centre post, applying overbu..

This is a flat, square-edged 500mm x 500mm x 10mm glass plate used as a non-porous rolling/reference..

This is a 50kN CBR load frame with an adjustable twin-column frame, proving rings for 10kN and 28kN ..

This is a fully hardened and tempered stainless-steel asphalt penetration test needle, 100g, with a ..

This is British Standard BS 8110:1997, covering the structural use of concrete.

This is a 300mm diameter BS test sieve with a 10mm aperture, used for grading coarse aggregate fract..

This is a 300mm diameter BS test sieve set spanning 75, 63, 50, 37.5, 28, 20, 14, 10, 6.3 and 5mm ap..

A 10mm x 250mm cold steel chisel used for excavating and breaking up soil or material samples during..

A compaction mould (152.4mm diameter, 116.43mm high) complete with base plate and 101.6mm extension ..

A CBR compaction mould assembly (101.6mm internal diameter, 116.43mm high) complete with base plate ..

This is a concrete compression testing machine to BS 1610 Grade A with a 300mm gauge and rectangular..

This is a stainless-steel bi-metal dial thermometer covering 10 to 210C, used for asphalt/bitumen mi..

This is a forced-air electric drying oven, thermostatically controlled between 105 and 110C, 0.225 c..

This is an electrically heated laboratory mixer with a 10 litre capacity and an isomantle electric h..

This is an electronic automatic balance with 50kg capacity accurate to 10g, supplied with a calibrat..

This is an electronic balance with 1000g capacity accurate to 0.01g, featuring a round pan, LCD disp..