Search

This is a nuclear densometer/density gauge (Troxler 3411B or similar approved) that measures wet/dry..

This is a larger-diameter (152.4mm) plated-steel compaction mould assembly with wing-nut clamped ext..

The 34-T0090 is a plated-steel CBR mould, 152.4mm diameter x 177.8mm body height, supplied complete ..

The 34-T0091 is a metal spacer disc with a T-handle for removal, inserted in the base of the CBR mou..

This set of solid displacer discs (61.4mm, 50.8mm, and two of 38.8mm thick) is used inside the mould..

This 150mm diameter perforated swell plate is used in the CBR swell/expansion test, fitted with a he..

This is the 34-T0092/A swell gauge: a perforated swell plate with adjustable stem used together with..

This three-legged tripod straddles the CBR mould, carrying a dial gauge calibrated in 0.01mm divisio..

The 34-T0093 is a stainless tripod stand carrying a dial gauge indicator, seated on the CBR mould's ..

This 10lb annular surcharge weight is machined with a radial slot so it slips over the mould's centr..

The 34-T0094 is a 2.27kg annular (solid ring) surcharge weight used in stacks on the CBR specimen to..

The 34-T0095 is a 2.27kg slotted (split-opening) surcharge weight that slides over the mould's space..

This 5lb split surcharge weight is cast as two interlocking half-rings that clamp around the mould's..

This solid, perforated 2.8kg base plate fits under the CBR mould in place of the standard drainage b..

This is a flat, beveled 300mm steel strike-off bar with handles, used to level and trim excess soil ..

The EDG-S200 is a non-nuclear electronic soil density/moisture gauge (a Troxler-type alternative), g..