Search

These are 200mm x 200mm x 50mm deep steel baking trays, used for heating or drying asphalt/aggregate..

This is a 450mm diameter x 150mm deep metallic mason's basin used for hand-blending aggregate, morta..

The same ABS reel housing with folding support legs and crank handle, 50m graduated cable for medium..

A steel reel water level meter with an analogue indicator gauge, 50m cable.

A 50mm soft-bristle brush used for cleaning sample trays, moulds, and lab equipment.

This is a 50mm steel distance piece that sits between the compression machine's platens to take up t..

Steel test cylinder (150mm internal diameter) with matching plunger and base plate, used to apply a ..

This is an automatic CBR/Proctor compaction press with 50 tonnes capacity, driving a rammer through ..

This is a standard 250ml borosilicate-glass beaker with graduated markings and a moulded pour spout,..

This is a 450mm diameter BS test sieve with a 0.075mm (No. 200) aperture, the standard silt/clay cut..

This is a 450mm diameter BS test sieve with a 0.3mm aperture, for finer sand-silt boundary grading.

This is a 450mm diameter BS test sieve with a 0.425mm aperture, for fine sand fractions in particle-..

This is a 450mm diameter BS test sieve with a 0.6mm aperture, used mid-range in a coarse-to-fine sie..

This is a 450mm diameter BS test sieve with a 20mm aperture, for medium-coarse aggregate grading.

This is a 450mm diameter BS test sieve with a 37.5mm aperture, used for grading coarse aggregate fra..

This is a 450mm diameter BS test sieve with a 5mm aperture, separating fine gravel from sand-sized m..

This calibrating can, 150mm diameter x 150mm deep with a 250mm rim, is used to determine the bulk de..

This larger calibrating can, 200mm diameter x 250mm deep with a 250mm rim, is used for calibrating s..

A 10mm x 250mm cold steel chisel used for excavating and breaking up soil or material samples during..

This is a single-cavity hinged steel cube mould, 150mm, with wing-nut clamps and a welded base plate..