Search
1m X 1m X 75mm Deep Galvanised Metal Tray
This is a 1m x 1m x 75mm deep galvanised metal tray used for spreading, mixing and air-drying bulk s..
75mm Brush
A 75mm-wide brush used in a materials-testing lab for cleaning sieves, moulds, and sample containers..
Astm Sieve 200 Mm Diameter 4.75 Mm Stainless Steel Mesh
This is an ASTM 200mm diameter stainless steel test sieve fitted with a 4.75mm mesh.
Astm Sieve 200 Mm Diameter 75 Mic Stainless Steel Mesh
This is an ASTM 200mm diameter stainless steel test sieve fitted with a 75 micron mesh.
Bs 812 : 1975 Parts 1 to 4 Inc., Methods for Sampling and Testing of Mineral Aggregates, Sands and Fillers.
This is British Standard BS 812:1975 Parts 1 to 4, covering methods for sampling and testing of mine..
Bs Sieve 200 Mm Diameter 75 Mic
This is a 200mm diameter BS test sieve with a 75 micron aperture, the conventional silt/clay boundar..
Bs Sieve 200mm Diameter 0.425 and 0.075mm
This is a 200mm diameter BS test sieve pair at 0.425mm and 0.075mm apertures, used for fine aggregat..
Bs Sieve 200mm Diameter in Sizes 2, 1, 0.6, 0.5, 0.425, 0.30, 0.15 and 0.075 Plus Lid and Receiver
This is a 200mm diameter BS test sieve set spanning 2, 1, 0.6, 0.5, 0.425, 0.3, 0.15 and 0.075mm ape..
Bs Sieve 300mm Diameter in Sizes 75 Mm
This is a 300mm diameter BS test sieve with a 75mm aperture, used for grading coarse aggregate fract..
Bs Sieve 300mm Diameter in Sizes 75, 63, 50, 37.5, 28, 20, 14, 10, 6.3, 5 and 4mm, Plus Lid and Receiver
This is a 300mm diameter BS test sieve set spanning 75, 63, 50, 37.5, 28, 20, 14, 10, 6.3 and 5mm ap..
Bs Sieve 300mm Diameter Size 75mm
This is a 300mm diameter stainless-steel-framed test sieve to BS 410, with a 75mm aperture, stackabl..
Bs Sieve 450mm Diameter, 0.075mm
This is a 450mm diameter BS test sieve with a 0.075mm (No. 200) aperture, the standard silt/clay cut..
Cbr Test Mould 152x175mm with 48mm Spacer, Collar & Perforated Base Plate, 2.27kg Annular & Split Surcharge Weights
This CBR test mould, 152x175mm, is a rust-resistant plated-steel cylindrical mould fitted with a 48m..
Forced Draft Oven of Temprature Between 120 to 175 Degrees
This is a forced-air convection laboratory oven with a digital thermostat, covering a temperature ra..
Galvanized Metal Tray 1mx0.5mx75mm Deep
A galvanized metal tray (1m x 0.5m x 75mm deep) used in a soil-testing lab for handling, drying, or ..
Hichance Ht-75a Brick Rebound Meter
The HT-75A is a lightweight rebound hammer sized for brick and other low-strength masonry materials,..
Langry RH75-A Brick Test Hammer
The RG75-A is a higher-energy rebound hammer for testing rock/masonry surface hardness, with a longe..
Moisture Content Tins, 75 Mm Dia, Cadmium or Aluminium Plated
These are 75mm diameter moisture content tins, cadmium or aluminium plated, with a close-fitting lid..
Portable Dial Thermometer 50 to 250 Deg. C Accurate to +3% with 0.75m Long Stem
This is the same type of portable dial thermometer as the standard model, but fitted with a long 0.7..
Steel Rod 75mm Long X 3.2mm Diameter
This plain steel reference rod, 75mm long x 3.2mm diameter, is used as a rolling gauge in the plasti..