Search

A set of two mason hammers (1.5kg and 3.5kg) and a 1kg rubber mallet, used for breaking and shaping ..

An ABS-cased dipper reel with a buzzer/light indicator that activates on probe contact with water, 1..

A 100mm soft-bristle brush used for cleaning sample trays, moulds, and lab equipment.

A 2.25kg (5lb) split surcharge weight, placed on top of a soil sample in a CBR test mould to simulat..

This is a 2.27kg/5lb set of annular surcharge weights that slip over the mould's centre post, applyi..

This solid, perforated 2.8kg base plate fits under the CBR mould in place of the standard drainage b..

A larger-capacity ABS reel body, same durable plastic housing and stand, 200m graduated tape.

This cylindrical wire mesh basket, 200mm diameter with apertures no greater than 6.5mm, holds roughl..

These are 200mm x 200mm x 50mm deep steel baking trays, used for heating or drying asphalt/aggregate..

A 300mm-diameter, 20mm-aperture BS test sieve used to grade soil and aggregate samples by particle s..

This is a 3-metre straight-edge with equal end supports plus calibrated graduated wedges, used to me..

This is a bench-top centrifuge extractor with a 3000g specimen capacity, driven by a variable-speed ..

An ABS water level dipper with a reinforced plastic disc casing for extended cable storage, 300m cab..

A compact ABS-cased water level dipper reel with a graduated cable and stainless steel sensing probe..

This 4.5kg/10lb set of annular surcharge weights slips over the mould's centre post, applying overbu..

An ABS-cased reel unit built for deep boreholes, 400m graduated cable length.

This is a 450mm diameter x 150mm deep metallic mason's basin used for hand-blending aggregate, morta..

This is a 5-litre tinplate storage container with a tight-fitting slip lid, the standard format used..

A full-capacity ABS-cased water level gauge dipper, 500m graduated cable for very deep wells and bor..

This is a flat, square-edged 500mm x 500mm x 10mm glass plate used as a non-porous rolling/reference..