Search
Aggregate Crushing Value Apparatus of 150mm Internal Diameter with Plunger and Base Plate
Steel test cylinder (150mm internal diameter) with matching plunger and base plate, used to apply a ..
Aggregate Crushing Value Apparatus, 130 Mm Nominal Diameter ,including Plunger and Base Plate
This aggregate crushing value apparatus has a 130mm nominal diameter cylinder, hardened to resist co..
Base Plate for Slump
This is a galvanized steel base plate with twin carry handles that the slump cone stands on during f..
Cbr Mould, 152.4 Dia X 178mm High, Complete with Perforated Base Plate and Extension Collar 50.8 Mm High That Can Be Fitted to Either End of the Mould
This is a CBR mould, 152.4mm diameter x 178mm high, supplied complete with a perforated base plate a..
Cbr Test Mould 152x175mm with 48mm Spacer, Collar & Perforated Base Plate, 2.27kg Annular & Split Surcharge Weights
This CBR test mould, 152x175mm, is a rust-resistant plated-steel cylindrical mould fitted with a 48m..
Compaction Mould 152.4mm Dia X 116.43 High Complete with Base Plate and Extension Collar, 101.6mm
A compaction mould (152.4mm diameter, 116.43mm high) complete with base plate and 101.6mm extension ..
Compaction Mould Complete with Base Plate and Extension Collar 101.6 Internal Diameter X 116.43mm High
A CBR compaction mould assembly (101.6mm internal diameter, 116.43mm high) complete with base plate ..
Marshall Compaction Mould Complete with Collar Mould + Base Plate + Extension Collar
Three-piece cylindrical steel mould assembly - barrel, removable base plate, and extension collar - ..
Percentage Refusal Density ( Prd ) Split Mould and Base Plate
This is a vertically split mould with a clamp-attached base plate, used for Percentage Refusal Densi..
Prd Vibratory Hammer Complete with Shanks, Tampers, 6 Moulds and 7 Base Plates
Hand-held electric vibrating hammer fitted with a tamping foot, used together with a split mould and..
Slump Cone, Tamping Rod and Base
This is a complete slump test set: a standard Abrams slump cone with a tamping rod and base plate, u..
Tian 34-t0097 2.8 Kg Solid Base Plate for Cbr Mould
This solid, perforated 2.8kg base plate fits under the CBR mould in place of the standard drainage b..
Tian Include Slump Cone, and Base Plate Slump Cone, Set
This is a standard Abrams slump cone mounted on a flat steel base plate with foot clamps, supplied w..
Tian Sm-bp40 Base Plate
The SM-BP40 is a galvanized steel base plate, 400x400x40mm deep with twin carry handles, that the sl..
Utest Assembly Tool for Base Plate for Uts-0610b.e
An assembly tool for fitting the base plate of the UTest UTS-0610B.E test apparatus, used when assem..
Utest Cbr Perforated Base Plate En
A round, drainage-perforated steel base plate that clamps to the CBR mould, allowing water to pass d..
