Search
1.5kg, 3.5kg Mason Hammers and 1kg Rubber Mallet
A set of two mason hammers (1.5kg and 3.5kg) and a 1kg rubber mallet, used for breaking and shaping ..
A Stout Watertight Container in Which the Basket Can Be Freely Suspended
This is a stout watertight container in which the wire mesh sample basket can be freely suspended wi..
Automatic Cbr Proctor Compaction Press , 50 Tonnes Capacity with an Adjustable Distance Between Platens of 530 to 250mm (hydraulic Operation), Rammer Weights and Automatic Count Selector
This is an automatic CBR/Proctor compaction press with 50 tonnes capacity, driving a rammer through ..
Balance of Sufficient Capacity and Sensitivity to Enable Maximum Specific Gravity of Samples of Uncompacted Paving Mixtures to Be Calculated (to Four Significant Figures), Equipped with a Suitable Suspension Apparatus to Permit Weighing of the Samples...
This is a balance of sufficient capacity and sensitivity to enable the maximum specific gravity of u..
Beaker 250ml
This is a standard 250ml borosilicate-glass beaker with graduated markings and a moulded pour spout,..
Bench Mounted Mixer, 5 Litre Capacity with Isomantle Heater
This is a bench mounted mixer, 5 litre capacity, with an isomantle electric heater, used for prepari..
Bottle Roller Compact Bench Mounted Unit Designed to Rotate 2 Bottles Simultaneously About Longitudinal Axis
This is a bench-mounted bottle roller that rotates two extraction bottles simultaneously about their..
Bouyancy Balance, 5000g Capacity Accurate to 0.1g, to Be of Size and Type to Permit the Basket Containing the Sample to Be Suspended in Water, Electronic, Complete with Frame and Lifting System.
This is an electronic buoyancy balance, 5000g capacity accurate to 0.1g, sized and mounted so the ba..
Bs 4466, Bending Dimensions and Scheduling of Bars for the Reinforcement of Concrete
This is British Standard BS 4466, covering bending dimensions and scheduling of bars for the reinfor..
Cbr Mould, 152.4 Dia X 178mm High, Complete with Perforated Base Plate and Extension Collar 50.8 Mm High That Can Be Fitted to Either End of the Mould
This is a CBR mould, 152.4mm diameter x 178mm high, supplied complete with a perforated base plate a..
Centrifuge Tubes
This is a 100ml graduated conical glass centrifuge tube with fine graduations near the tip, used to ..
Concrete Cube Mould, Steel 150mm
This is a single-cavity hinged steel cube mould, 150mm, with wing-nut clamps and a welded base plate..
Cube Tamping Bar / Rods
This is a steel cube tamping bar/rod used to compact concrete in layers during cube-mould casting.
Electric Oven, Thermostatically Controlled Between 105 and 1100 Deg. Celcius, 0.225 Cu.m. Min. Capacity
This is a forced-air electric drying oven, thermostatically controlled between 105 and 110C, 0.225 c..
Electronic Balance to Nearest 0.1g with 6kg Capacity and Provision for Hook at the Bottom to Enable Weighing From Below
This is an electronic balance, 6kg capacity accurate to 0.1g, mounted so a sample can be suspended a..
Forced Draft Oven of Temprature Between 120 to 175 Degrees
This is a forced-air convection laboratory oven with a digital thermostat, covering a temperature ra..
Gas Heated Oven, Thermostatically Controlled Between 105 and 1100 Deg. Celcius, 0.225 Cu.m. Min. Capacity
This is a gas-heated drying oven, thermostatically controlled between 105 and 110C, 0.225 cubic metr..
Glass or Metal Container of at Least 1,000ml Capacity Sufficiently Strong to Withstand a Partial Vacuum, with a Cover Fitted with a Rubber Gasket and a Hose Conection. Fine Wire Mesh Shall Cover the Hose Opening to Prevent Loss of Fines. the Top Surfac...
This is a thick-walled glass filter flask, 1000ml capacity, with side-tubulation for vacuum tubing a..
Laboratory Bench Ovens
This is a laboratory bench oven with a digital thermostat, used for drying soil, aggregate and mix c..
Plate Bearing Test Machine
This is a field plate-load bearing test kit that measures soil and pavement settlement under control..
