Search

This is a 100mm steel distance piece that sits between the compression machine's platens to take up ..

A 2.25kg (5lb) split surcharge weight, placed on top of a soil sample in a CBR test mould to simulat..

This is a 2.27kg/5lb set of annular surcharge weights that slip over the mould's centre post, applyi..

2.49kg Compaction hammer, drop regulated to 304.8mm

This solid, perforated 2.8kg base plate fits under the CBR mould in place of the standard drainage b..

This cylindrical wire mesh basket, 200mm diameter with apertures no greater than 6.5mm, holds roughl..

A 200mm x 200mm x 20mm cadmium-plated or aluminium sample tin used for moisture-content and general ..

This is a 20mm steel distance piece that sits between the compression machine's platens to take up t..

This is a 3-metre straight-edge with equal end supports plus calibrated graduated wedges, used to me..

This is a bench-top centrifuge extractor with a 3000g specimen capacity, driven by a variable-speed ..

4.535kg compaction hammer drop regulated to 457.2mm

This 4.5kg/10lb set of annular surcharge weights slips over the mould's centre post, applying overbu..

This is a 450mm diameter x 150mm deep metallic mason's basin used for hand-blending aggregate, morta..

This is a 5-litre tinplate storage container with a tight-fitting slip lid, the standard format used..

This is a 50kN CBR load frame with an adjustable twin-column frame, proving rings for 10kN and 28kN ..

This is a 50mm steel distance piece that sits between the compression machine's platens to take up t..

This is an 80mm steel distance piece that sits between the compression machine's platens to take up ..

This is a stout watertight container in which the wire mesh sample basket can be freely suspended wi..

This is a standard A4-size clipboard with a spring clip, used for holding field or lab data sheets w..