Search

2.49kg Compaction hammer, drop regulated to 304.8mm

4.535kg compaction hammer drop regulated to 457.2mm

This is an automatic CBR/Proctor compaction press with 50 tonnes capacity, driving a rammer through ..

A compaction mould (152.4mm diameter, 116.43mm high) complete with base plate and 101.6mm extension ..

A CBR compaction mould assembly (101.6mm internal diameter, 116.43mm high) complete with base plate ..

This is the rigid compaction pedestal and specimen mould holder used to support a Marshall mould dur..

This is a hand-operated Marshall compaction hammer used to compact asphalt specimens for mix design ..

Three-piece cylindrical steel mould assembly - barrel, removable base plate, and extension collar - ..

This is a hinged safety cage that fits around the rotating mould/hammer assembly of an automatic CBR..

This set of solid displacer discs (61.4mm, 50.8mm, and two of 38.8mm thick) is used inside the mould..

This is a 1-litre, plated-steel Proctor compaction mould with an internal diameter and height matchi..

This hand-operated 2.49kg drop hammer has a tamping face that slides inside a guide sleeve so the ma..

This is the heavier counterpart rammer at 4.535kg mass with the drop height extended to 457.2mm, use..

Electric vibrating hammer used with a tamping foot to compact soil or bituminous mix specimens to re..

This is a larger-diameter (152.4mm) plated-steel compaction mould assembly with wing-nut clamped ext..

This set of solid displacer discs (61.4mm, 50.8mm, and two of 38.8mm thick) is used inside the mould..

The 76-B0057 is a three-piece Marshall compaction mould (base plate, cylinder body, collar) made fro..

This is the EDC-1, a floor-standing automatic CBR/Proctor compaction press with 50 tonnes capacity, ..

The EDC-3A is an automatic electric Marshall compaction machine with hammer and pedestal, forming as..

The EDC-3A is an automatic compaction hammer with dual hammer weights and a 457mm drop height, formi..