Search
Automatic Bitumen Penetrometer (el 46-5380/01) with Accessories with Ip 38 Deg.c Thermometer
Microprocessor-controlled automatic bitumen penetrometer that drives a calibrated needle into a temp..
Bs 882: 1201 Part 2, 1973, Aggregates From Natural Sources for Concrete
This is British Standard BS 882:1201 Part 2, 1973, covering aggregates from natural sources for conc..
Compaction Mould 152.4mm Dia X 116.43 High Complete with Base Plate and Extension Collar, 101.6mm
A compaction mould (152.4mm diameter, 116.43mm high) complete with base plate and 101.6mm extension ..
Compaction Mould Complete with Base Plate and Extension Collar 101.6 Internal Diameter X 116.43mm High
A CBR compaction mould assembly (101.6mm internal diameter, 116.43mm high) complete with base plate ..
Electronic Balance Capacity 1000 G, Accurate to 0.01g
This is an electronic balance with 1000g capacity accurate to 0.01g, featuring a round pan, LCD disp..
Flow Meter Bs 598 Dial Gauge Graduated 0.01 Mm with 25 Mm
This is a precision dial flow meter to BS 598, used to measure specimen flow during the Marshall sta..
Los Angeles Abrasion Machine to Astm Standards as El 42-530/01 or Similar
Rotating-drum abrasion tester (roughly 700mm internal diameter) that tumbles a loaded aggregate samp..
Mechanical Dial Gauge 25mm X 0.01mm Divisions
This is a precision analog mechanical dial gauge with 25mm travel and 0.01mm divisions, used across ..
Penetration Gauge Range 0-25mm Travel X 0.01mm Divisions
This dial penetration gauge has 0-25mm travel with 0.01mm graduations, mounted on the piston or ring..
Steel Tray 0.3x0.3x0.01m Deep
This is a small galvanized steel tray, 0.3m x 0.3m x 0.01m deep, for holding, drying, or subdividing..
Swell Measurement Tripod Complete with Gauge Calibrated in 0.01mm Divisions
This three-legged tripod straddles the CBR mould, carrying a dial gauge calibrated in 0.01mm divisio..
Tian 16-t0012/c Cone Penetrometer ( Dcp ) Hammer Weighing 8kg
The 16-T0012/C Cone Penetrometer (DCP) hammer, weighing 8kg, used to drive the dynamic cone penetrom..
Tian 16-t0013/b Electric or Petrol Engine Powered Light Duty Penetrometer on Mobile Platform Capable of Penetrating to 15 M Depth, to Include Toolkit, Spares for Engine, and 40 Spare Cones ( Additional Cones and Rods to Be Supplied as Required )
Wheeled, engine-driven dynamic cone penetrometer that drops a weighted hammer to drive test rods int..
TIAN 33-T0070 Compaction mould complete with base plate and extension collar,101.6 mm dia x116.43 mm high
This is a 1-litre, plated-steel Proctor compaction mould with an internal diameter and height matchi..
Tian 33-t8701 Refusal Compaction Equipment Bs 594 (vibratory Hammer)
Electric vibrating hammer used with a tamping foot to compact soil or bituminous mix specimens to re..
TIAN 34-T0071 Compaction mould 152.4 mm. dia x 116.43 mm complete with base plate and extension collar, 101.6 mm
This is a larger-diameter (152.4mm) plated-steel compaction mould assembly with wing-nut clamped ext..
TIAN 34-T0093 Swell measurement tripod complete with guage calibrated in 0.01mm divisions
This three-legged tripod straddles the CBR mould, carrying a dial gauge calibrated in 0.01mm divisio..
Tian 42-5305/01 Los Angeles Abrasion to Astm Standards
This is the Los Angeles Abrasion machine, a rotating steel drum turning at 31-33 rpm to grade aggreg..
Tian 55-c0193/b Soaking Tank for Cbr Mould Sufficient for 50 Moulds
This large-capacity soaking tank holds up to 50 CBR mould assemblies immersed simultaneously over th..
TIAN 55-C0193/B Soaking tank for cubes (capacity 50 No.)
This heavy-duty curing/soaking tank for concrete cubes and cylinders holds a capacity of 50 cubes, u..