Search

The HC-CS202 is a crack depth tester, a handheld device with two long coiled cables connected to cyl..

The LR-FK202 is a handheld microscope-style crack-width gauge with wireless data transfer, reading 0..

This is a 28kN capacity proving ring graduated in 0.0025mm divisions, used with the Marshall compres..

This is a matched pair of interchangeable compaction tamping feet, 102mm and 146mm diameter, each fi..

The 63-L0028 is a manual Vicat apparatus for cement setting-time/consistency testing per EN 196-3, w..

The CTM-01 is a CBR load frame with an adjustable twin-column frame, proving ring and penetration ba..

The CTM-02 is an automatic electrical CBR (California Bearing Ratio) loading machine with servo-moto..

This is a 200mm woven-wire test sieve at a 0.425mm aperture, a standard size in silt/sand gradation ..

This is a 200mm woven-wire test sieve at a 0.300mm aperture, used for fine sand/silt separation.

This is a 200mm woven-wire test sieve at a 0.212mm aperture, used toward the finer end of standard g..

This is a 200mm woven-wire test sieve at a 0.150mm aperture, commonly the finer-sand cutoff in soil ..

This is a 200mm woven-wire test sieve at a 0.075mm aperture, the conventional No. 200 sieve marking ..

This is a 200mm woven-wire test sieve at a 0.063mm aperture, the finest woven-wire size in this rang..

The XY10002C is an electronic balance with 1000g capacity and 0.01g readability, featuring a round p..

This is a 250mm vernier caliper accurate to 0.002mm, offering the same four-way measuring capability..