Search
Bs 556: Part 2, 1972, Concrete Cylindrical Pipes and Fittings
This is British Standard BS 556 Part 2, 1972, covering concrete cylindrical pipes and fittings.
Bs 5911: Parts 1 and 2, Precast Concrete Pipes and Fittings
This is British Standard BS 5911 Parts 1 and 2, covering precast concrete pipes and fittings.
Cbr Mould, 152.4 Dia X 178mm High, Complete with Perforated Base Plate and Extension Collar 50.8 Mm High That Can Be Fitted to Either End of the Mould
This is a CBR mould, 152.4mm diameter x 178mm high, supplied complete with a perforated base plate a..
Complete Set of Hot Pot Extractor Including Non-corrodable Mesh Which Fits Into the Metal Pot with a Gasket Cover, Coke, Dean and Stark Receiver and Reflux Condenser
This is a complete hot pot extractor set including non-corrodable mesh that fits into a metal pot wi..
Electric Vibrating Kango Hammer Fitted with Steel Tamper (bs1377) with Support Frame
An electric vibrating (kango) hammer fitted with a steel tamper and support frame, used to mechanica..
Flask Funnel for Fitting to the 700ml Steel Bottle with Rim of Funnel Retaining Sieve 200mm Nominal Diameter
A flask funnel fitting a 700ml steel bottle, with its rim retaining a 200mm nominal diameter sieve.
Foot Pump for Pressurising Air Water Assemblies up to a Maximum of 700kn/m2 and Fitted with Flexible Hose Approximately 1.2m Long and Connector
A foot pump for pressurising air-water assemblies up to 700 KN/m2, fitted with a flexible hose of ab..
Glass or Metal Container of at Least 1,000ml Capacity Sufficiently Strong to Withstand a Partial Vacuum, with a Cover Fitted with a Rubber Gasket and a Hose Conection. Fine Wire Mesh Shall Cover the Hose Opening to Prevent Loss of Fines. the Top Surfac...
This is a thick-walled glass filter flask, 1000ml capacity, with side-tubulation for vacuum tubing a..
Tamping Foot 102mm Diameter and 146mm Diameter and Shanks to Fit the Supplied Vibratory Hammer
This is a matched pair of interchangeable compaction tamping feet, 102mm and 146mm diameter, each fi..