Search

A set of two mason hammers (1.5kg and 3.5kg) and a 1kg rubber mallet, used for breaking and shaping ..

2.49kg Compaction hammer, drop regulated to 304.8mm

This is a 3.5kg hammer with a drop-forged, heat-treated steel head on a fibreglass-cored, soft-grip ..

4.535kg compaction hammer drop regulated to 457.2mm

This is a 7kg hammer with a high-carbon drop-forged steel head, used for driving stakes or breaking ..

An electric vibrating (kango) hammer fitted with a steel tamper and support frame, used to mechanica..

The RH-N is an N-type (2.207J) rebound hammer, the same impact class as the RH225-A, used for standa..

The RH20-A is a low-energy (0.196J) pointer-type hammer for testing soft mortar joints, in the 2-15 ..

The RH225-A is an analogue spring-driven rebound hammer with a sliding scale readout and aluminium-a..

The RH225-B is a digital rebound hammer with an electronic display, a non-contact electromagnetic se..

The RH450-A is a heavy-duty 4.5J rebound hammer for 50-100 MPa high-strength concrete, used on bridg..

The RH550-A is a top-tier 5.5J rebound hammer for C50-C100 concrete, with a chrome pointer.

The RG75-A is a higher-energy rebound hammer for testing rock/masonry surface hardness, with a longe..

This is a hand-operated Marshall compaction hammer used to compact asphalt specimens for mix design ..

Hand-held electric vibrating hammer fitted with a tamping foot, used together with a split mould and..

A steel tamping rod compatible with a kango vibrating hammer, used to compact soil samples inside a ..

This is a matched pair of interchangeable compaction tamping feet, 102mm and 146mm diameter, each fi..

The 16-T0012/C Cone Penetrometer (DCP) hammer, weighing 8kg, used to drive the dynamic cone penetrom..

This field tool set comprises two 1.5kg and two 3.5kg mason (club) hammers plus two 1kg rubber malle..

This hand-operated 2.49kg drop hammer has a tamping face that slides inside a guide sleeve so the ma..