Search
1.5kg, 3.5kg Mason Hammers and 1kg Rubber Mallet
A set of two mason hammers (1.5kg and 3.5kg) and a 1kg rubber mallet, used for breaking and shaping ..
2.25kg/5lbs Split Surcharge Weight
A 2.25kg (5lb) split surcharge weight, placed on top of a soil sample in a CBR test mould to simulat..
2.27kg/5lbs Set of Annular Surcharge Weights
This is a 2.27kg/5lb set of annular surcharge weights that slip over the mould's centre post, applyi..
2.49kg Compaction Hammer, Drop Regulated to 304.8mm
2.49kg Compaction hammer, drop regulated to 304.8mm
2.8kg Solid Base Plate for Cbr Mould
This solid, perforated 2.8kg base plate fits under the CBR mould in place of the standard drainage b..
200mm Dia Wire Mesh Basket with Apertures Not Greater Than 6.5mm Large Enough to Contain 2.5 Kg of Aggregate
This cylindrical wire mesh basket, 200mm diameter with apertures no greater than 6.5mm, holds roughl..
3.5 Kg Hammer
This is a 3.5kg hammer with a drop-forged, heat-treated steel head on a fibreglass-cored, soft-grip ..
4.535kg Compaction Hammer Drop Regulated to 457.2mm
4.535kg compaction hammer drop regulated to 457.2mm
4.5kg/10lbs Set of Annular Surcharge Weights
This 4.5kg/10lb set of annular surcharge weights slips over the mould's centre post, applying overbu..
7kg Hammer
This is a 7kg hammer with a high-carbon drop-forged steel head, used for driving stakes or breaking ..
Cbr Test Mould 152x175mm with 48mm Spacer, Collar & Perforated Base Plate, 2.27kg Annular & Split Surcharge Weights
This CBR test mould, 152x175mm, is a rust-resistant plated-steel cylindrical mould fitted with a 48m..
Electronic Automatic Balance 50kg Capacity Accurate to 10g Including Weights
This is an electronic automatic balance with 50kg capacity accurate to 10g, supplied with a calibrat..
Electronic Balance to Nearest 0.1g with 6kg Capacity and Provision for Hook at the Bottom to Enable Weighing From Below
This is an electronic balance, 6kg capacity accurate to 0.1g, mounted so a sample can be suspended a..
Gas Cylinders 13kg Compatible with Supplied Stoves
This is a standard 13kg steel LPG gas cylinder compatible with the supplied stoves, used as a field/..
Lockable Tool Box Containing:1pr "molegrips" 2*150mm Screw Driver,2*300mm Screw Driver(1standard and 1philips Head of Each) Adjustable Spanners 200mm and 300mm 1 Pr General Purpose Pliers, 1 Plastic Faced Mallet(1kg), 1 Set Imperial Spanners 14'' to 15...
This is a lockable tool box populated with a general hand-tool set: mole grips, screwdrivers, adjust..
Rubber Mallet (1kg)
This is a 1kg dual-face rubber mallet (general-purpose face and non-marking face) on a fibreglass ha..
Semi-automatic Balance, 25kg Capacity Accurate to 1g ,including Weights
A semi-automatic balance with 25kg capacity, accurate to 1g, supplied with a set of calibration weig..
Tian 100pcs/pkg Filter Screen(filter Paper)
This is a pack of 100 medium-speed filter papers used to line centrifuge extraction bowls when recov..
Tian 16-t0012/c Cone Penetrometer ( Dcp ) Hammer Weighing 8kg
The 16-T0012/C Cone Penetrometer (DCP) hammer, weighing 8kg, used to drive the dynamic cone penetrom..
Tian 1mg-2kg M1class Weights, Set
This is an OIML Class M1 stainless-steel calibration weight set spanning 1mg to 2kg, supplied in a f..