Search

A galvanized metal tray (1.2m x 1.2m x 50mm deep) used for handling and drying larger soil or aggreg..

A set of two mason hammers (1.5kg and 3.5kg) and a 1kg rubber mallet, used for breaking and shaping ..

A 1.5-metre aluminium straight edge used in soil and materials testing labs to check the flatness of..

This is a 1m x 1m x 75mm deep galvanised metal tray used for spreading, mixing and air-drying bulk s..

A 2.25kg (5lb) split surcharge weight, placed on top of a soil sample in a CBR test mould to simulat..

This is a 2.27kg/5lb set of annular surcharge weights that slip over the mould's centre post, applyi..

This solid, perforated 2.8kg base plate fits under the CBR mould in place of the standard drainage b..

This cylindrical wire mesh basket, 200mm diameter with apertures no greater than 6.5mm, holds roughl..

These are 200mm x 200mm x 50mm deep steel baking trays, used for heating or drying asphalt/aggregate..

This is a 3.5kg hammer with a drop-forged, heat-treated steel head on a fibreglass-cored, soft-grip ..

This is a bench-top centrifuge extractor with a 3000g specimen capacity, driven by a variable-speed ..

4.535kg compaction hammer drop regulated to 457.2mm

This 4.5kg/10lb set of annular surcharge weights slips over the mould's centre post, applying overbu..

This is a 450mm diameter x 150mm deep metallic mason's basin used for hand-blending aggregate, morta..

This is a 5-litre tinplate storage container with a tight-fitting slip lid, the standard format used..

A full-capacity ABS-cased water level gauge dipper, 500m graduated cable for very deep wells and bor..

A heavy-duty steel reel housing for maximum cable capacity, 500m cable.

This is a flat, square-edged 500mm x 500mm x 10mm glass plate used as a non-porous rolling/reference..

This is a 50kN CBR load frame with an adjustable twin-column frame, proving rings for 10kN and 28kN ..