Search
2.8kg Solid Base Plate for Cbr Mould
This solid, perforated 2.8kg base plate fits under the CBR mould in place of the standard drainage b..
5 Litre Capacity Steel Storage Containers with Leak and Dustproof Lids for Storage of Bitumen Samples
This is a 5-litre tinplate storage container with a tight-fitting slip lid, the standard format used..
Astm Lid 200 Mm Diameter
This is a 200mm diameter ASTM sieve lid, a flat cap that closes the top of a sieve stack.
Astm Lid 300 Mm Diameter
This is a 300mm diameter ASTM sieve lid, a larger flat cap that closes the top of a 300mm sieve stac..
Bs Sieve 200mm Diameter in Sizes 2, 1, 0.6, 0.5, 0.425, 0.30, 0.15 and 0.075 Plus Lid and Receiver
This is a 200mm diameter BS test sieve set spanning 2, 1, 0.6, 0.5, 0.425, 0.3, 0.15 and 0.075mm ape..
Bs Sieve 200mm Diameter Lid
This is a 200mm BS sieve lid, a flat cap used to close the top of a sieve stack and prevent sample l..
Bs Sieve 300mm Diameter in Sizes 75, 63, 50, 37.5, 28, 20, 14, 10, 6.3, 5 and 4mm, Plus Lid and Receiver
This is a 300mm diameter BS test sieve set spanning 75, 63, 50, 37.5, 28, 20, 14, 10, 6.3 and 5mm ap..
Bs Sieve 300mm Diameter Lid
This is a 300mm diameter BS sieve lid, a flat cap used to close the top of a sieve stack and prevent..
Consolidation Apparatus
This is a lever-arm oedometer/consolidation apparatus that applies vertical load to a laterally conf..
Glass Jar Capacity 5 Litres with Lid
This is a 5-litre wide-mouth glass jar with a screw-on lid, used for bulk sample or reagent storage ..
Hot Extractor Complete with Wire Gauze Container Gasket, Cork Lid and Support Assembly
This is a complete hot extractor set with wire gauze container, gasket, cork lid and support assembl..
Liquid Limit Penetration Test Cone, Stainless Steel, 30° Angle 80 G (together with Sliding Shaft) and 20g Additonal Weight
This is a precision-ground stainless-steel liquid limit penetration cone with a 30-degree apex angle..
Moisture Content Tin with Lid, Aluminum, 150mm X 50mm Height
These are 150mm diameter x 50mm height moisture content tins with a close-fitting lid, sized to hold..
Moisture Content Tin with Lid, Aluminum, 50mm X 40mm Height
These are 50mm diameter x 40mm height moisture content tins with a close-fitting lid, sized to hold ..
Moisture Content Tin with Lid, Aluminum, Ø45mm X 10mm Height
This is a shallow, low-profile aluminium sample tin, 45mm diameter x 10mm height, with lid, sized fo..
Moisture Content Tin/s& Equivalent Measuring Tin with Lid, Aluminum, Ø55mm X 35mm Height
This is a lightweight seamless aluminium tin, 55mm diameter x 35mm height, with a tight slip-fit lid..
Plastic or Metal Bucket Including Lid, 10litres Capacity
This is a 10-litre plastic or metal bucket with a lid, used for mixing, carrying or storing soil sam..
Set of Lid and Receiver for Metal Scoop and Steel Trays
This is a set of a lid and receiver for the metal scoop and steel trays, used together for handling ..
Tian 34-t0097 2.8 Kg Solid Base Plate for Cbr Mould
This solid, perforated 2.8kg base plate fits under the CBR mould in place of the standard drainage b..
Tian 5 Litre Capacity Steel Storage Containers with Leak and Dust Proof Lids for Storage of Bitumen Samples
A 5 litre steel storage container with a leak- and dust-proof lid, for storing bitumen samples.