Search

This is a 100mm steel distance piece that sits between the compression machine's platens to take up ..

This is a 20mm steel distance piece that sits between the compression machine's platens to take up t..

This is a 50mm steel distance piece that sits between the compression machine's platens to take up t..

This is an 80mm steel distance piece that sits between the compression machine's platens to take up ..

This is a laboratory CBR loading frame operated by a hand-cranked mechanical jack with a height-adju..

This is a concrete compression testing machine to BS 1610 Grade A with a 300mm gauge and rectangular..

This is a Deval abrasion testing machine with two hollow steel cylinders mounted at an angle to a ro..

This is an electrical 30kN Marshall compression testing machine, including a 28kN proving ring and f..

This is a drop-hammer impact testing machine used to determine the Aggregate Impact Value (AIV), fea..

Rotating-drum abrasion tester (roughly 700mm internal diameter) that tumbles a loaded aggregate samp..

This is a motorised CBR machine with an adjustable twin-column frame, proving ring and penetration b..

This is a motorized, microprocessor-controlled compression/tension testing machine with a four-colum..

This is a field plate-load bearing test kit that measures soil and pavement settlement under control..

This is a 28kN capacity proving ring graduated in 0.0025mm divisions, used with the Marshall compres..

This is a hinged transparent enclosure that fits over the platens of a concrete compression testing ..

This is an electromechanical direct/residual shear testing machine for soils, using servo-controlled..

This spare set of twelve hardened steel balls is the grinding charge loaded into the Los Angeles Abr..

This is a 200mm sieve receiver, a solid stainless-steel base pan that sits beneath a sieve stack to ..

The CE-3000 is an SMM-type centrifuge asphalt extractor for determining bitumen content in bituminou..

The CTM-02 is an automatic electrical CBR (California Bearing Ratio) loading machine with servo-moto..