Search

Precision Engineering. Unrivaled Performance.

Search

Quickview

Brass Ring Mould

This is a Le Chatelier soundness-test brass ring mould, a split spring-brass cylinder with two indic..

Quickview

Cbr Mould, 152.4 Dia X 178mm High, Complete with Perforated Base Plate and Extension Collar 50.8 Mm High That Can Be Fitted to Either End of the Mould

This is a CBR mould, 152.4mm diameter x 178mm high, supplied complete with a perforated base plate a..

Quickview

Cbr Test Mould 152x175mm with 48mm Spacer, Collar & Perforated Base Plate, 2.27kg Annular & Split Surcharge Weights

This CBR test mould, 152x175mm, is a rust-resistant plated-steel cylindrical mould fitted with a 48m..

Quickview

Compaction Mould 152.4mm Dia X 116.43 High Complete with Base Plate and Extension Collar, 101.6mm

A compaction mould (152.4mm diameter, 116.43mm high) complete with base plate and 101.6mm extension ..

Quickview

Compaction Mould Complete with Base Plate and Extension Collar 101.6 Internal Diameter X 116.43mm High

A CBR compaction mould assembly (101.6mm internal diameter, 116.43mm high) complete with base plate ..

Quickview

Compaction Pedestal + Specimen Mould Holder

This is the rigid compaction pedestal and specimen mould holder used to support a Marshall mould dur..

Quickview

Concrete Cube Mould, Steel 150mm

This is a single-cavity hinged steel cube mould, 150mm, with wing-nut clamps and a welded base plate..

Quickview

Gyratory Compactor (laboratory Mix Design) with 100mm and 150mm Diameter Moulds

This is a gyratory compactor for laboratory mix design, forming asphalt specimens by simultaneous ve..

Quickview

Ladle for Placing Mixture in Moulds

This is a long-handled stainless steel ladle used to transfer hot asphalt mixture from the mixing bo..

Quickview

Linear Shrinkage Mould

This is a brass linear-shrinkage mould with a semi-circular channel, used to determine the linear sh..

Quickview

Marshall Compaction Mould Complete with Collar Mould + Base Plate + Extension Collar

Three-piece cylindrical steel mould assembly - barrel, removable base plate, and extension collar - ..

Quickview

Percentage Refusal Density ( Prd ) Split Mould and Base Plate

This is a vertically split mould with a clamp-attached base plate, used for Percentage Refusal Densi..

Quickview

Prd Vibratory Hammer Complete with Shanks, Tampers, 6 Moulds and 7 Base Plates

Hand-held electric vibrating hammer fitted with a tamping foot, used together with a split mould and..

Quickview

Proctor Test Mould 100cm Cubic

This is a 1000cc (100cm cubic) Proctor test mould, a cylindrical mild-steel mould fitted with a deta..

Quickview

Test Bar Moulds

This is a gang steel prism mould producing standard-gauge mortar/cement test bars with removable par..

Quickview

Tian 22-t0037 Linear Shrinkage Mould (bs 1377)

This is a brass linear-shrinkage mould with a semi-circular channel, used to determine the linear sh..

Quickview

Tian 34-t0090 Cbr Mould with All Accessories

The 34-T0090 is a plated-steel CBR mould, 152.4mm diameter x 177.8mm body height, supplied complete ..

Quickview

Tian 34-t0097 2.8 Kg Solid Base Plate for Cbr Mould

This solid, perforated 2.8kg base plate fits under the CBR mould in place of the standard drainage b..

Quickview

Tian 55-c0193/b Soaking Tank for Cbr Mould Sufficient for 50 Moulds

This large-capacity soaking tank holds up to 50 CBR mould assemblies immersed simultaneously over th..

Quickview

Tian 76-b0057 Marshall Compaction Moulds Complete as Required Filter Paper of Moulds

The 76-B0057 is a three-piece Marshall compaction mould (base plate, cylinder body, collar) made fro..

Showing 1 to 20 of 31 (2 Pages)
Chat on WhatsApp