Search
Astm D1559: Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus
This is ASTM D1559, the Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures U..
Complete Set of Marshall Specimen Density Measuring Apparattus , Metal Table Witha Hole at the Centre to Allow Weghing From the Top of the Table and Adjustable Hieght for Plastic Bucket Providedwith and Stainless Wire Mesh Basket Large Enough for Placi...
This is a complete set of Marshall specimen density measuring apparatus: a metal table with a hole a..
Electrical 30kn Marshall Compression Testing Machine Including 28kn Proving Ring and Flow Meter
This is an electrical 30kN Marshall compression testing machine, including a 28kN proving ring and f..
Glass or Metal Container of at Least 1,000ml Capacity Sufficiently Strong to Withstand a Partial Vacuum, with a Cover Fitted with a Rubber Gasket and a Hose Conection. Fine Wire Mesh Shall Cover the Hose Opening to Prevent Loss of Fines. the Top Surfac...
This is a thick-walled glass filter flask, 1000ml capacity, with side-tubulation for vacuum tubing a..
Marshall Compaction Hammer, Manual
This is a hand-operated Marshall compaction hammer used to compact asphalt specimens for mix design ..
Marshall Compaction Mould Complete with Collar Mould + Base Plate + Extension Collar
Three-piece cylindrical steel mould assembly - barrel, removable base plate, and extension collar - ..
Marshall Specimen Extractor, Universal Extruder
Bench-mounted mechanical/hydraulic extruder that pushes a compacted specimen out of its mould via a ..
Proving Ring 28kn Capacity Graduated in 0.0025mm for Marshall Compression Testing Machine
This is a 28kN capacity proving ring graduated in 0.0025mm divisions, used with the Marshall compres..
Shallow Tray of Area Not Less Than 0.065m2
This shallow flat-bottomed tray, at least 0.065 m2 in area, is used for spreading and surface-drying..
Tian 76-b0057 Marshall Compaction Moulds Complete as Required Filter Paper of Moulds
The 76-B0057 is a three-piece Marshall compaction mould (base plate, cylinder body, collar) made fro..
TIAN EDC-3A Automatic Marshall compaction machine with Hammer and pedestal
The EDC-3A is an automatic electric Marshall compaction machine with hammer and pedestal, forming as..
Tian Ld-6 Electrical 30kn Marshall Compression Testing Machine
The LD-6 is an electrical 30kN capacity Marshall compression testing machine with a load frame drivi..