Search
Compaction Pedestal + Specimen Mould Holder
This is the rigid compaction pedestal and specimen mould holder used to support a Marshall mould dur..
Complete Set of Marshall Specimen Density Measuring Apparattus , Metal Table Witha Hole at the Centre to Allow Weghing From the Top of the Table and Adjustable Hieght for Plastic Bucket Providedwith and Stainless Wire Mesh Basket Large Enough for Placi...
This is a complete set of Marshall specimen density measuring apparatus: a metal table with a hole a..
Marshall Specimen Extractor, Universal Extruder
Bench-mounted mechanical/hydraulic extruder that pushes a compacted specimen out of its mould via a ..
Rubber Gloves to Remove Specimens From Water Bath
This is a pair of rubber gloves used to remove specimens from the water bath.
Tian 16-t0080 Specimen Extractor
This is a hydraulic specimen extractor built around a 20kN jack, used for pushing Marshall/Proctor/C..
Tian Szr-11 Bath Minimum 150mm Deep, Thermostatically Controlled to Maintain Water Temperature at 60oc + 1oc with Perforated False Bottom or Equipped with Shelf to Support Specimen 50mm Above the Bottom of Bath Etc.
SZR-11 water bath, minimum 150mm deep, thermostatically controlled to 60C +/-1C, with a perforated f..
Water Bath Minimum 150mm Deep, Thermostatically Controlled to Maintain Water Temperature at 60 Deg.c + 1 Deg.c with Perforated False Bottom or Equipped with Shelf to Support Specimen 50mm Above the Bottom of Bath
This is a stainless-steel-lined water bath at least 150mm deep with insulated outer casing, fitted w..
Showing 1 to 7 of 7 (1 Pages)