Search

This is a bench-top centrifuge extractor with a 3000g specimen capacity, driven by a variable-speed ..

This is a 50kN CBR load frame with an adjustable twin-column frame, proving rings for 10kN and 28kN ..

These are CBR perforated swell plates with swell tripods: a perforated metal plate with a central ad..

Motorised rotor-bowl centrifuge extractor that spins a bitumen/solvent suspension at high speed to s..

This is a 100ml graduated conical glass centrifuge tube with fine graduations near the tip, used to ..

This is a Dean and Stark receiver with condenser to suit trichloroethylene, a graduated glass distil..

This is a Deval abrasion testing machine with two hollow steel cylinders mounted at an angle to a ro..

This is a forced-air electric drying oven, thermostatically controlled between 105 and 110C, 0.225 c..

This is an electric mechanical sieve shaker with adjustable frequency and amplitude, holding a stack..

An electric vibrating (kango) hammer fitted with a steel tamper and support frame, used to mechanica..

This is an electrical 30kN Marshall compression testing machine, including a 28kN proving ring and f..

This is an electrically heated laboratory mixer with a 10 litre capacity and an isomantle electric h..

This is a package of filter rings for the centrifuge, fitted inside the centrifuge bowl to retain fi..

The HC-D10 is an electric bond strength tester, a compact motorised pull-off test rig with a load ce..

This is a standard electric hot air drier used to gently warm and speed surface-drying of aggregate ..

This is a precision-machined replacement rotor bowl sized for 3000g-capacity centrifuge extractors, ..

This three-legged tripod straddles the CBR mould, carrying a dial gauge calibrated in 0.01mm divisio..

Wheeled, engine-driven dynamic cone penetrometer that drops a weighted hammer to drive test rods int..

This three-legged tripod straddles the CBR mould, carrying a dial gauge calibrated in 0.01mm divisio..

The 34-T0093 is a stainless tripod stand carrying a dial gauge indicator, seated on the CBR mould's ..