Search

This is a 2.27kg/5lb set of annular surcharge weights that slip over the mould's centre post, applyi..

This 4.5kg/10lb set of annular surcharge weights slips over the mould's centre post, applying overbu..

This is an automatic CBR/Proctor compaction press with 50 tonnes capacity, driving a rammer through ..

This is British Standard BS 12, covering the requirements for the composition, manufacture, strength..

This is British Standard BS 1881 Parts 1 to 6, 1970/71, covering methods of testing concrete.

This is British Standard BS 445 Parts 1 to 3, covering methods of testing cement.

This is British Standard BS 5911 Parts 1 and 2, covering precast concrete pipes and fittings.

This is British Standard BS 812:1975 Parts 1 to 4, covering methods for sampling and testing of mine..

This is a calibration container for the UTS-0920 sand pouring cylinder, a cast-metal cylindrical con..

This CBR test mould, 152x175mm, is a rust-resistant plated-steel cylindrical mould fitted with a 48m..

This is a complete hot pot extractor set including non-corrodable mesh that fits into a metal pot wi..

This is a full-length white dust coat in a durable, washable poly-cotton blend, buttoning down the f..

This is an electronic automatic balance with 2000g capacity accurate to 0.1g, manual operation, supp..

This is an electronic automatic balance with 50kg capacity accurate to 10g, supplied with a calibrat..

This is the metal tray for the UTS-0920 sand pouring cylinder, a flat plated sheet-steel tray with a..

This is a thermostatically controlled melting pot suitable for heating bitumen, with a metal contain..

The PQWT L30 is a compact indoor leak sensor built for short-range (about 50cm) listening through in..

The PQWT L50 bundles both wall and floor sensor heads for general household leak-tracing behind wall..

This is a lightweight open-mesh hi-visibility reflective jacket/vest with vertical reflective stripi..

This is a BS 1377 riffle box with 50mm slots, a sample divider that splits a poured aggregate sample..