Search
Asphalt Institute, Superpave Manual Series No.2(sp-2)
This is the Asphalt Institute Superpave Manual Series No. 2 (SP-2), the official reference manual co..
Cone Penetrometer with Gauge and Automatically Controlled Test Cup
A cone penetrometer fitted with a gauge and an automatically controlled test cup, used to measure th..
Electric Vibrating Kango Hammer Fitted with Steel Tamper (bs1377) with Support Frame
An electric vibrating (kango) hammer fitted with a steel tamper and support frame, used to mechanica..
Foot Pump for Pressurising Air Water Assemblies up to a Maximum of 700kn/m2 and Fitted with Flexible Hose Approximately 1.2m Long and Connector
A foot pump for pressurising air-water assemblies up to 700 KN/m2, fitted with a flexible hose of ab..
Gas Cylinders 13kg Compatible with Supplied Stoves
This is a standard 13kg steel LPG gas cylinder compatible with the supplied stoves, used as a field/..
Hot Extractor Complete with Wire Gauze Container Gasket, Cork Lid and Support Assembly
This is a complete hot extractor set with wire gauze container, gasket, cork lid and support assembl..
Langry Upv2100 Ultrasonic Pulse Velocity Tester
The UPV2100 is an ultrasonic pulse-velocity unit with transmitter/receiver transducers for concrete ..
Penetration Test Cup
This is the small metal sample cup that holds the bitumen specimen during a needle-penetration test.
Purpose Made Detachable Handle 1.5m Long to Enable Trays to Be Picked Up
A purpose-made detachable handle, 1.5m long, used to safely lift and carry sample trays in a soil or..
Supply of Carbon Dioxide
This is a compressed carbon-dioxide gas cylinder, supplying the CO2 purge gas that prevents binder o..
Tamping Foot 102mm Diameter and 146mm Diameter and Shanks to Fit the Supplied Vibratory Hammer
This is a matched pair of interchangeable compaction tamping feet, 102mm and 146mm diameter, each fi..
Tian (b) Penetration Test Cup
A penetration test cup used to hold bitumen samples during the standard penetration test.
Tian 16-t0013/b Electric or Petrol Engine Powered Light Duty Penetrometer on Mobile Platform Capable of Penetrating to 15 M Depth, to Include Toolkit, Spares for Engine, and 40 Spare Cones ( Additional Cones and Rods to Be Supplied as Required )
Wheeled, engine-driven dynamic cone penetrometer that drops a weighted hammer to drive test rods int..
Tian Claw Hammer Hammer for Pull up Nails 0.75 Kg
This is a claw hammer, 0.75kg, with a drop-forged steel head (flat driving face on one side, curved ..
TIAN DLP-100B Cone penetrometer with gauge and automatically controlled test cup
This dial-gauge cone penetrometer mounts on a stand with a magnetically released plunger and a digit..
Tian Purpose-made Detachable Handle 1.5m Long to Pick up Sample Trays
A soft absorbent cloth (tea towel) for lab cleanup and drying.
Tian Spare Cones (additional Cones to Be Supplied as Required )
This is a single replaceable hardened cone tip for a dynamic cone penetrometer, threaded to mount on..
Tian Szr-11 Bath Minimum 150mm Deep, Thermostatically Controlled to Maintain Water Temperature at 60oc + 1oc with Perforated False Bottom or Equipped with Shelf to Support Specimen 50mm Above the Bottom of Bath Etc.
SZR-11 water bath, minimum 150mm deep, thermostatically controlled to 60C +/-1C, with a perforated f..
Tian Xy5000j Semi Automatic 5 Kg Balance Accurate to 0.1g to Be of Size and Type to Permit the Basket Containing the Sample to Be Suspended in Water (to Be Supplied with Weights)
The XY5000J is a semi-automatic 5kg balance accurate to 0.1g, sized and mounted so the basket contai..
Water Bath Minimum 150mm Deep, Thermostatically Controlled to Maintain Water Temperature at 60 Deg.c + 1 Deg.c with Perforated False Bottom or Equipped with Shelf to Support Specimen 50mm Above the Bottom of Bath
This is a stainless-steel-lined water bath at least 150mm deep with insulated outer casing, fitted w..