Search
3000 G Capacity Asphalt Centrifuge Extractor Complying with Bs 598
This is a bench-top centrifuge extractor with a 3000g specimen capacity, driven by a variable-speed ..
Astm D1559: Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus
This is ASTM D1559, the Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures U..
Balance of Sufficient Capacity and Sensitivity to Enable Maximum Specific Gravity of Samples of Uncompacted Paving Mixtures to Be Calculated (to Four Significant Figures), Equipped with a Suitable Suspension Apparatus to Permit Weighing of the Samples...
This is a balance of sufficient capacity and sensitivity to enable the maximum specific gravity of u..
Bs 594, 598, Sampling of Bituminous Mixtures
This is British Standard BS 594/598, covering sampling of bituminous mixtures.
Cbr Mould, 152.4 Dia X 178mm High, Complete with Perforated Base Plate and Extension Collar 50.8 Mm High That Can Be Fitted to Either End of the Mould
This is a CBR mould, 152.4mm diameter x 178mm high, supplied complete with a perforated base plate a..
Central Extruder, Complete with 20kn Hydraulic Jack and Accessories
This bench extruder is built around a 20kN hydraulic jack that pushes the compacted specimen out of ..
Compaction Mould 152.4mm Dia X 116.43 High Complete with Base Plate and Extension Collar, 101.6mm
A compaction mould (152.4mm diameter, 116.43mm high) complete with base plate and 101.6mm extension ..
Compaction Mould Complete with Base Plate and Extension Collar 101.6 Internal Diameter X 116.43mm High
A CBR compaction mould assembly (101.6mm internal diameter, 116.43mm high) complete with base plate ..
Complete Set of Hot Pot Extractor Including Non-corrodable Mesh Which Fits Into the Metal Pot with a Gasket Cover, Coke, Dean and Stark Receiver and Reflux Condenser
This is a complete hot pot extractor set including non-corrodable mesh that fits into a metal pot wi..
Extension Rods 400mm, Dia. 16mm
This is a galvanized steel extension rod, 400mm long x 16mm diameter, used to lengthen a Dynamic Con..
Extractor Fan
This is a wall/duct-mounted extraction fan with backdraft shutters, used to ventilate solvent fumes ..
Gssi Extension Pole for Structurescan Mini Xt and Mini Lxt
This telescoping accessory pole with a six-button remote lets operators scan walls and overhead area..
Gssi Linetrac Xt
LineTrac XT is the updated EM-detection accessory built specifically for the StructureScan Mini XT, ..
Gssi Palmxt Antenna for Mini Xt
PalmXT is a compact, small-form-factor GPR antenna module for the StructureScan Mini XT that gives a..
Gssi Structurescan Mini Lxt Concrete Scanning Ndt System
The Mini LXT is GSSI's entry-level handheld concrete scanner with integrated marking lasers and a 6...
Gssi Structurescan Mini Xt Concrete Scanning Ndt System
The Mini XT is GSSI's professional-grade handheld concrete scanner with a 2.7GHz antenna and multipl..
Hot Extractor Complete with Wire Gauze Container Gasket, Cork Lid and Support Assembly
This is a complete hot extractor set with wire gauze container, gasket, cork lid and support assembl..
Ladle for Placing Mixture in Moulds
This is a long-handled stainless steel ladle used to transfer hot asphalt mixture from the mixing bo..
Langry 2.5m Extension Bar for G200 Rebar Scanners
A 2.5m extension bar for the Langry G200 rebar scanner, used to extend the scanner's reach when surv..
Marshall Compaction Mould Complete with Collar Mould + Base Plate + Extension Collar
Three-piece cylindrical steel mould assembly - barrel, removable base plate, and extension collar - ..