Search

A set of two mason hammers (1.5kg and 3.5kg) and a 1kg rubber mallet, used for breaking and shaping ..

This is a 5-litre tinplate storage container with a tight-fitting slip lid, the standard format used..

This is a 50kN CBR load frame with an adjustable twin-column frame, proving rings for 10kN and 28kN ..

This is AASHTO Part I, Standard Specifications, the official AASHTO reference volume of standard spe..

Steel test cylinder (150mm internal diameter) with matching plunger and base plate, used to apply a ..

This aggregate crushing value apparatus has a 130mm nominal diameter cylinder, hardened to resist co..

This is ASTM Volume 04.03, Road and Paving Materials; Vehicle-Pavement Systems, the official ASTM In..

This is ASTM D1559, the Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures U..

This is an automatic CBR/Proctor compaction press with 50 tonnes capacity, driving a rammer through ..

This is a balance of sufficient capacity and sensitivity to enable the maximum specific gravity of u..

This is an electronic buoyancy balance, 5000g capacity accurate to 0.1g, sized and mounted so the ba..

This is British Standard BS 1198, 1119 and 1200:1976, covering building sands from natural sources.

This is British Standard BS 12, covering the requirements for the composition, manufacture, strength..

This is British Standard BS 1924, covering methods of test for cement-stabilised and lime-stabilised..

This is British Standard BS 433 Parts 1 and 2, covering bitumen road emulsions.

This is British Standard BS 4466, covering bending dimensions and scheduling of bars for the reinfor..

This is British Standard BS 556 Part 2, 1972, covering concrete cylindrical pipes and fittings.

This is British Standard BS 5911 Parts 1 and 2, covering precast concrete pipes and fittings.

This is British Standard BS 812:1975 Parts 1 to 4, covering methods for sampling and testing of mine..

This is a 200mm diameter BS test sieve pair at 0.425mm and 0.075mm apertures, used for fine aggregat..