Search
200mm Dia Wire Mesh Basket with Apertures Not Greater Than 6.5mm Large Enough to Contain 2.5 Kg of Aggregate
This cylindrical wire mesh basket, 200mm diameter with apertures no greater than 6.5mm, holds roughl..
3000 G Capacity Asphalt Centrifuge Extractor Complying with Bs 598
This is a bench-top centrifuge extractor with a 3000g specimen capacity, driven by a variable-speed ..
5 Litre Capacity Steel Storage Containers with Leak and Dustproof Lids for Storage of Bitumen Samples
This is a 5-litre tinplate storage container with a tight-fitting slip lid, the standard format used..
Aggregate Crushing Value Apparatus of 150mm Internal Diameter with Plunger and Base Plate
Steel test cylinder (150mm internal diameter) with matching plunger and base plate, used to apply a ..
Automatic Bitumen Penetrometer (el 46-5380/01) with Accessories with Ip 38 Deg.c Thermometer
Microprocessor-controlled automatic bitumen penetrometer that drives a calibrated needle into a temp..
Automatic Cbr Proctor Compaction Press , 50 Tonnes Capacity with an Adjustable Distance Between Platens of 530 to 250mm (hydraulic Operation), Rammer Weights and Automatic Count Selector
This is an automatic CBR/Proctor compaction press with 50 tonnes capacity, driving a rammer through ..
Balance of Sufficient Capacity and Sensitivity to Enable Maximum Specific Gravity of Samples of Uncompacted Paving Mixtures to Be Calculated (to Four Significant Figures), Equipped with a Suitable Suspension Apparatus to Permit Weighing of the Samples...
This is a balance of sufficient capacity and sensitivity to enable the maximum specific gravity of u..
Bench Mounted Mixer, 5 Litre Capacity with Isomantle Heater
This is a bench mounted mixer, 5 litre capacity, with an isomantle electric heater, used for prepari..
Bouyancy Balance, 5000g Capacity Accurate to 0.1g, to Be of Size and Type to Permit the Basket Containing the Sample to Be Suspended in Water, Electronic, Complete with Frame and Lifting System.
This is an electronic buoyancy balance, 5000g capacity accurate to 0.1g, sized and mounted so the ba..
Breaking Head Complete with Gauge Disc Conforming to Bs 598
This is the breaking head complete with gauge disc conforming to BS 598, a split curved jaw assembly..
Cbr Mould, 152.4 Dia X 178mm High, Complete with Perforated Base Plate and Extension Collar 50.8 Mm High That Can Be Fitted to Either End of the Mould
This is a CBR mould, 152.4mm diameter x 178mm high, supplied complete with a perforated base plate a..
Cbr Perforated Swell Plates with Swell Tripods
These are CBR perforated swell plates with swell tripods: a perforated metal plate with a central ad..
Cbr Test Mould 152x175mm with 48mm Spacer, Collar & Perforated Base Plate, 2.27kg Annular & Split Surcharge Weights
This CBR test mould, 152x175mm, is a rust-resistant plated-steel cylindrical mould fitted with a 48m..
Central Extruder, Complete with 20kn Hydraulic Jack and Accessories
This bench extruder is built around a 20kN hydraulic jack that pushes the compacted specimen out of ..
Compaction Mould 152.4mm Dia X 116.43 High Complete with Base Plate and Extension Collar, 101.6mm
A compaction mould (152.4mm diameter, 116.43mm high) complete with base plate and 101.6mm extension ..
Compaction Mould Complete with Base Plate and Extension Collar 101.6 Internal Diameter X 116.43mm High
A CBR compaction mould assembly (101.6mm internal diameter, 116.43mm high) complete with base plate ..
Complete Set of Hot Pot Extractor Including Non-corrodable Mesh Which Fits Into the Metal Pot with a Gasket Cover, Coke, Dean and Stark Receiver and Reflux Condenser
This is a complete hot pot extractor set including non-corrodable mesh that fits into a metal pot wi..
Complete Set of Marshall Specimen Density Measuring Apparattus , Metal Table Witha Hole at the Centre to Allow Weghing From the Top of the Table and Adjustable Hieght for Plastic Bucket Providedwith and Stainless Wire Mesh Basket Large Enough for Placi...
This is a complete set of Marshall specimen density measuring apparatus: a metal table with a hole a..
Concrete Compression Machine, to Bs 1610 Grade a with 300mm Gauge, Rectangular Platens, Capacity 1560kn, Complete with Safety Guard, 50, 70, 100mm Distance Pieces and Electro-mechanical Load Pacer, 100mm or Equivalent
This is a concrete compression testing machine to BS 1610 Grade A with a 300mm gauge and rectangular..
Cone Penetrometer for Liquid Limit with Dial Gauge and Timer
This is a bench-mounted cone penetrometer with a 150mm dial gauge (0.1mm divisions), chromed microme..