Electromechanical Flexural-Compression Testing Machine

Electromechanical Flexural-Compression Testing Machine can perform Flexural-Compression Tests of various types of materials.

It is produced with a capacity of 50 kN or 100 kN.

The device works with an Electromechanical Motor.

Piston movement is limited by 2 switches located at the top and bottom of the piston.

The Electromechanical Flexural-Compression Testing Machine machine consists of;

• Load Frame
• 50 kN or 100 kN Load Cell according to device capacity,
• Movable Upper Plate for compression tests,
• Digital graphic readout unit
• Software

Accessories should be ordered separately according to the type of test to be performed for flexure tests.
 
Load Frame
The Load Frame consist of 2 rigid columns, a cast iron base with gear box inside and a steel bridge to hold the Load cell and accessories.
The vertical distance can be adjusted by the help of the upper platen.
The distance between the columns can be adjusted up to 1 meter.
 
Digital Graphic Readout Unit
The device can be controlled from the computer automatically or run from the control unit automatically or manually.
Load/stress values can be read from the computer or LCD screen Graphic Readout Unit.
The Load vs Time graph can be seen from the LCD screen during the test.
Test data can be stored by the computer after failure.
The pace rate can be adjusted between 0,05 and 24 kN/sn.

Software
The device can be connected to any computer with Ethernet cable.
Thanks to software, different types of user and sample data can be stored and printed out the test report.
HİRA Compression-Flexural Software is provided free of charge with the device.
 
FLEXURAL TESTING ACCESSORIES
 
Flexural Testing Assembly for Concrete Beams 

The test assembly is used for 3 or 4 point flexural tests on 100 or 150 mm Concrete Beams.
 The set consist of 2 upper and 2 lower rollers of Ø38 x 160 mm.
 The distance of lower bearers can be adjusted between 100 mm and 800 mm. The distance between upper bearers can be set to 100 mm or 150 mm.
 For 3 point testing one of the bearers can be removed and the other placed in the center.
 
Flexural Testing Assembly for Concrete Kerbs 

The test assembly is used for flexural tests on Concrete Kerbs.
 The set consists of 2 lower rollers of Ø 20 x 620 mm and Ø 40 mm upper loading piston with ball seating assembly.
 The distance of lower rollers can be adjusted between 100 mm to 800 mm. 
 
Flexural Test Assembly for Concrete Paving Flags and Concrete Terrazzo Tiles, Natural Stone Kerbs and Slabs

The test assembly is used for flexural tests on Concrete Paving Flags and Concrete Terrazzo Tiles, Natural Stone Kerbs and Slabs.
 The set consists of 2 lower rollers and upper roller of Ø 20x 620 mm.
 The distance of lower rollers can be adjusted between 100 mm to 800 mm.
 
Splitting Tensile Test Device for Block Pavers
Splitting Tensile Test Device for Block Pavers is accessory for compression machines for measuring the splitting tensile strengths of 60-100 mm height x 220 mm length concrete block pavers according to the requirements of the related standards.

Splitting Tensile Test Device for Concrete Cubes
Splitting Tensile Test Device for Concrete Cubes is accessory for compression machines for measuring the splitting tensile strengths of 150 mm cube concrete specimens according to the requirements of the related standards.

Splitting Tensile Test Device for Cylinders
Splitting Tensile Test Device for Cylinders is accessory for compression machines for measuring the splitting tensile strengths of Ø150x300 mm and Ø160x320 mm cylindrical specimens according to the requirements of the related standards.

CEMENT COMPRESSION & FLEXURAL TEST ACCESSORIES
 
Cement Flexural Jig Assembly ( 40x40x160 mm)
It is used for flexural strength test of 40x40x160 mm cement samples.
Cement Compression Jig Assembly (40x40x40 mm)
It is used for compressive strength test of 40x40x160 mm cement samples.
Cement Compression Jig Assembly (50x50x50 mm)
It is used for compressive strength test of 50x50x50 mm cement samples.
Cement Compression Jig Assembly (70,7 mm)
It is used for compressive strength test of 70,7 mm cement samples.