1
/
ya
1
HIRA
CBR Test Machine With Load Ring
CBR Test Machine With Load Ring
Standards: EN 13286-47, BS 1377:4, ASTM D1883, AASHTO T193, NF P94-078, UNI CNR 10009
CBR Test Machine is designed for performing laboratory evaluation of the CBR value of highway sub-bases and sub-grade and determination of the strength of cohesive materials.
The device is composed of a robust and compact two column frame with adjustable upper crossbeam.
The CBR Test Machine designed to load the penetration piston into the soil sample at a constant rate to measure the applied load and piston penetration at predetermined intervals.
Two test speeds can be chosen by using speed buttons on the device as 1.0 mm/min for BS and 1.27 mm/min. for ASTM/EN/AASHTO Tests.
For safety, the up and down travel of the lower platen is limited the use of limit switches.
The measuring system consists of a 50 kN capacity Load Ring fitted to the upper cross beam to read stability values and the 30 x 0.01 mm Analog Dial Indicator fitted to the column.
Supplied complete with 50 kNLoad Ring, 30 x 0,01 mm Analog Dial Indicator and CBR Penetration Piston.
The device is composed of a robust and compact two column frame with adjustable upper crossbeam.
The CBR Test Machine designed to load the penetration piston into the soil sample at a constant rate to measure the applied load and piston penetration at predetermined intervals.
Two test speeds can be chosen by using speed buttons on the device as 1.0 mm/min for BS and 1.27 mm/min. for ASTM/EN/AASHTO Tests.
For safety, the up and down travel of the lower platen is limited the use of limit switches.
The measuring system consists of a 50 kN capacity Load Ring fitted to the upper cross beam to read stability values and the 30 x 0.01 mm Analog Dial Indicator fitted to the column.
Supplied complete with 50 kNLoad Ring, 30 x 0,01 mm Analog Dial Indicator and CBR Penetration Piston.
Shiriki
×
Thank you. Your data has been successfully saved!
