-
Material Testing
- Aggregate and Chippings
- Aggregate Crushing Value Test (bs 812)
- Bitumen
- Bitumen Extraction Extractor Bottle Method (bs 598)
- Bitumen Spray Test (bs 1707)
- Cbr (aashto T193)
- Compaction Test (aashto T99 & T180)
- Concrete
- Concrete Cube Compression Testing
- Concrete Slump and Cube Manufacture (bs 1881)
- Consumables & Sundries
- Density - Nuclear Density Method (aashto T238)
- Density - Sand Replacement Method (bs1377)
- Drying, Weighing & Grading
- Flakiness (bs 812)
- General Equipment
- Los Angeles Abrasion Test
- Marshall Test (astm D1570 6 1559)
- Maximum S.g. of Bituminous Paving Mixtures (astm D2041)
- Miscellaneous Equipment & Reagents
- Others
- Quantitative Extraction of Bitumen From Bituminous Mixtures (astm D2172 & D95)
- Recovery of Bitumen From Solution
- Relative Density of Aggregates (bs 812)
- Sieve Analysis (bs 1377 & Astm)
- Soil
- Standard Specifications (latest Editions)
- Ndt Test Equipment
- Water Testing
Your quote request is empty!
Material Testing
-
Aggregate and Chippings
-
Aggregate Crushing Value Test (bs 812)
-
Bitumen
-
Bitumen Extraction Extractor Bottle Method (bs 598)
-
Bitumen Spray Test (bs 1707)
-
Cbr (aashto T193)
-
Compaction Test (aashto T99 & T180)
-
Concrete
-
Concrete Cube Compression Testing
-
Concrete Slump and Cube Manufacture (bs 1881)
-
Consumables & Sundries
-
Density - Nuclear Density Method (aashto T238)
-
Density - Sand Replacement Method (bs1377)
-
Drying, Weighing & Grading
-
Flakiness (bs 812)
-
General Equipment
-
Los Angeles Abrasion Test
-
Marshall Test (astm D1570 6 1559)
-
Maximum S.g. of Bituminous Paving Mixtures (astm D2041)
-
Miscellaneous Equipment & Reagents
-
Others
-
Quantitative Extraction of Bitumen From Bituminous Mixtures (astm D2172 & D95)
-
Recovery of Bitumen From Solution
-
Relative Density of Aggregates (bs 812)
-
Sieve Analysis (bs 1377 & Astm)
-
Soil
-
Standard Specifications (latest Editions)
Polythene or Glass 20 Litres Storage Vessels with Tap at Bottom
This is a 20-litre polythene or glass storage vessel with a tap at the bottom, used for holding and ..
Polythene Wash Bottle(500ml)
This is a 500ml polyethylene squeeze wash bottle with an integrated dispensing nozzle and screw cap,..
Porker Vibrator
This is an electric immersion (poker) vibrator with a flexible drive shaft and cylindrical vibrating..
Portable Dial Thermometer 50 to 250 Deg. C Accurate to +3%
This is a portable dial thermometer reading 50C to 250C with roughly +/-3% accuracy, used for spot-c..
Portable Dial Thermometer 50 to 250 Deg. C Accurate to +3% with 0.75m Long Stem
This is the same type of portable dial thermometer as the standard model, but fitted with a long 0.7..
Potassium Dichromate (reagent Grade)
Potassium dichromate (reagent grade) is an orange-red crystalline solid, typically ACS grade at high..
Pots Suitable for Heating Bitumen
This is a thermostatically controlled melting pot suitable for heating bitumen, with a metal contain..
Prd Vibratory Hammer Complete with Shanks, Tampers, 6 Moulds and 7 Base Plates
Hand-held electric vibrating hammer fitted with a tamping foot, used together with a split mould and..
Pressure Filter Complete with Cutting Tool for Making Hole in the Filter Paper
This is a pressure filter complete with cutting tool for making a hole in the filter paper, a plated..
Primus Gas Stove
A portable gas stove used in a materials-testing lab or field setup for procedures requiring heating..
Proctor Test Mould 100cm Cubic
This is a 1000cc (100cm cubic) Proctor test mould, a cylindrical mild-steel mould fitted with a deta..
Proving Ring 28kn Capacity Graduated in 0.0025mm for Marshall Compression Testing Machine
This is a 28kN capacity proving ring graduated in 0.0025mm divisions, used with the Marshall compres..
Proving Ring for Cbr Load Frame, 10 Kn Capacity
This 10kN capacity proving ring for the CBR load frame is used for lower-strength/soft subgrade spec..
Proving Ring for Cbr Load Frame, 28 Kn Capacity
This 28kN capacity proving ring for the CBR load frame is used for mid-range load measurement.
Proving Ring for the Cbr Load Frame of 50 Kn Capacity
This is a 50kN capacity proving (load) ring for the CBR load frame, a calibrated steel ring with int..
Pulse Velocity Measurement
This is an ultrasonic pulse velocity tester for non-destructive concrete evaluation, using paired tr..
Purpose Made Detachable Handle 1.5m Long to Enable Trays to Be Picked Up
A purpose-made detachable handle, 1.5m long, used to safely lift and carry sample trays in a soil or..
Pycnometer of 1 Litre Capacity
This 1-litre pycnometer is fitted with a watertight conical screw top pierced by a small apex hole, ..
Rain Gauge, Mettallic
This is a Symons-pattern non-recording metallic rain gauge with brass/gunmetal fittings, supplied wi..
Rain Gauge, Plastic
This is a durable, UV-resistant plastic rain gauge comprising a collecting funnel and a graduated me..
