75mm Brush
A 75mm-wide brush used in a materials-testing lab for cleaning sieves, moulds, and sample containers..
Compaction Mould 152.4mm Dia X 116.43 High Complete with Base Plate and Extension Collar, 101.6mm
A compaction mould (152.4mm diameter, 116.43mm high) complete with base plate and 101.6mm extension ..
Compaction Mould Complete with Base Plate and Extension Collar 101.6 Internal Diameter X 116.43mm High
A CBR compaction mould assembly (101.6mm internal diameter, 116.43mm high) complete with base plate ..
Cone Penetrometer with Gauge and Automatically Controlled Test Cup
A cone penetrometer fitted with a gauge and an automatically controlled test cup, used to measure th..
Electric Oven, Thermostatically Controlled Between 105 and 1100 Deg. Celcius, 0.225 Cu.m. Min. Capacity
This is a forced-air electric drying oven, thermostatically controlled between 105 and 110C, 0.225 c..
Electric Vibrating Kango Hammer Fitted with Steel Tamper (bs1377) with Support Frame
An electric vibrating (kango) hammer fitted with a steel tamper and support frame, used to mechanica..
Galvanized Metal Tray 1mx0.5mx75mm Deep
A galvanized metal tray (1m x 0.5m x 75mm deep) used in a soil-testing lab for handling, drying, or ..
Gas Heated Oven, Thermostatically Controlled Between 105 and 1100 Deg. Celcius, 0.225 Cu.m. Min. Capacity
This is a gas-heated drying oven, thermostatically controlled between 105 and 110C, 0.225 cubic metr..
Liquid Limit Device to Bs 1377
This is a brass-cup Casagrande liquid limit device to BS 1377, with a hand crank, cam-and-follower d..
Moisture Content Tins, 75 Mm Dia, Cadmium or Aluminium Plated
These are 75mm diameter moisture content tins, cadmium or aluminium plated, with a close-fitting lid..
Semi-automatic Balance, 25kg Capacity Accurate to 1g ,including Weights
A semi-automatic balance with 25kg capacity, accurate to 1g, supplied with a set of calibration weig..
Steel Tamping Rod (bs1377) Compatible with Kango Hammer
A steel tamping rod compatible with a kango vibrating hammer, used to compact soil samples inside a ..
Stop Clock
A stop clock used to time test procedures precisely in a soil or materials testing laboratory.
Straight Edge 300mm Long
A 300mm-long straight edge used to strike off and level the surface of a compacted soil sample in a ..
Tian 2 No 1.5kg, 2no 3.5kg Mason Hammers and 2 No 1kg Rubber Mallet
This field tool set comprises two 1.5kg and two 3.5kg mason (club) hammers plus two 1kg rubber malle..
Tian 25mm Steel Chisel
This is a hardened-steel hand chisel with a 25mm flat blade, roughly 200mm long, used to break up co..
TIAN 33-T0070 Compaction mould complete with base plate and extension collar,101.6 mm dia x116.43 mm high
This is a 1-litre, plated-steel Proctor compaction mould with an internal diameter and height matchi..
Tian 33-t0075 2.49kg. Compaction Hammer, Drop Regulated to 304.8mm
This hand-operated 2.49kg drop hammer has a tamping face that slides inside a guide sleeve so the ma..
Tian 33-t0076 4.535kg Compaction Hammer Drop Regulated to 457.2mm
This is the heavier counterpart rammer at 4.535kg mass with the drop height extended to 457.2mm, use..
Tian 33-t8701 Refusal Compaction Equipment Bs 594 (vibratory Hammer)
Electric vibrating hammer used with a tamping foot to compact soil or bituminous mix specimens to re..