-
Material Testing
- Aggregate and Chippings
- Aggregate Crushing Value Test (bs 812)
- Bitumen
- Bitumen Extraction Extractor Bottle Method (bs 598)
- Bitumen Spray Test (bs 1707)
- Cbr (aashto T193)
- Compaction Test (aashto T99 & T180)
- Concrete
- Concrete Cube Compression Testing
- Concrete Slump and Cube Manufacture (bs 1881)
- Consumables & Sundries
- Density - Nuclear Density Method (aashto T238)
- Density - Sand Replacement Method (bs1377)
- Drying, Weighing & Grading
- Flakiness (bs 812)
- General Equipment
- Los Angeles Abrasion Test
- Marshall Test (astm D1570 6 1559)
- Maximum S.g. of Bituminous Paving Mixtures (astm D2041)
- Miscellaneous Equipment & Reagents
- Others
- Quantitative Extraction of Bitumen From Bituminous Mixtures (astm D2172 & D95)
- Recovery of Bitumen From Solution
- Relative Density of Aggregates (bs 812)
- Sieve Analysis (bs 1377 & Astm)
- Soil
- Standard Specifications (latest Editions)
- Ndt Test Equipment
- Water Testing
Your quote request is empty!
1.5kg, 3.5kg Mason Hammers and 1kg Rubber Mallet
A set of two mason hammers (1.5kg and 3.5kg) and a 1kg rubber mallet, used for breaking and shaping ..
100mm Brush, Soft
A 100mm soft-bristle brush used for cleaning sample trays, moulds, and lab equipment.
3 Metre Straight-edge Including Calibrated Wedges
This is a 3-metre straight-edge with equal end supports plus calibrated graduated wedges, used to me..
3.5 Kg Hammer
This is a 3.5kg hammer with a drop-forged, heat-treated steel head on a fibreglass-cored, soft-grip ..
500mm X 500mm X 10mm Plate Glass (bs 1377)
This is a flat, square-edged 500mm x 500mm x 10mm glass plate used as a non-porous rolling/reference..
50mm Brush, Soft
A 50mm soft-bristle brush used for cleaning sample trays, moulds, and lab equipment.
7kg Hammer
This is a 7kg hammer with a high-carbon drop-forged steel head, used for driving stakes or breaking ..
Calibrating Can 150mm Diameter X 150mm Deep, 250mm Dia Rim
This calibrating can, 150mm diameter x 150mm deep with a 250mm rim, is used to determine the bulk de..
Calibrating Can 200mm Diameter X 250mm Deep, 250mm Dia Rim
This larger calibrating can, 200mm diameter x 250mm deep with a 250mm rim, is used for calibrating s..
Cold Steel Chisel 10mm X 250mm Long
A 10mm x 250mm cold steel chisel used for excavating and breaking up soil or material samples during..
Cold Steel Chisel 20mm X 300mm Long
A 20mm x 300mm cold steel chisel used for excavating and breaking up soil or material samples during..
Metal Containers (450mm Dia.)
A 450mm-diameter metal container used for handling and storing soil or aggregate samples in a testin..
Metal Tray 300 X 300mm Square, 40mm Deep, with 150mm Diameter Hole in the Centre
A square metal tray (300 x 300mm, 40mm deep) with a 150mm-diameter centre hole, used to support and ..
Metal Tray 500 X 500mm Square, 50mm Deep, with 200mm Diameter Hole in the Centre
A larger square metal tray (500 x 500mm, 50mm deep) with a 200mm-diameter centre hole, used to suppo..
Primus Gas Stove
A portable gas stove used in a materials-testing lab or field setup for procedures requiring heating..
Rubber Mallet (1kg)
This is a 1kg dual-face rubber mallet (general-purpose face and non-marking face) on a fibreglass ha..
Sand Pouring Cylinder, 150mm Diameter
A 150mm-diameter sand pouring cylinder used in the sand-replacement method to measure in-situ soil d..
Sand Pouring Cylinder, 215mm Diameter
A 215mm-diameter sand pouring cylinder used in the sand-replacement method to measure in-situ soil d..
Scoop for Removing Excavated Material From Hole, 250mm Long Handle
A scoop with a 250mm-long handle, used to remove excavated soil material from a test hole during fie..
Stainless Steel Tray 305mm Diameter X 50mm Deep
A stainless steel tray (305mm diameter x 50mm deep) used for handling and drying soil samples in a m..
