This is a BS 1377 riffle-type sample divider with twelve 50mm chutes that split a poured aggregate s..

This is a large-capacity 250mm diameter vacuum pycnometer with a steel base and clear dome lid, used..

This is a 25kg solid sealing-wax block, melted and applied to coat undisturbed soil samples (e.g. tu..

This is a hardened-steel hand chisel with a 25mm flat blade, roughly 200mm long, used to break up co..

This is a rigid 3-metre straight edge used with calibrated wedges to check surface regularity and fl..

This 3.5kg double-faced steel lump hammer on a short handle is used for compaction testing rigs, dri..

This is a 300mm sieve lid, a stainless-steel dust cover with a pull-knob used to cap the topmost sie..

This is a 300mm sieve receiver, a solid stainless-steel base pan that sits beneath a sieve stack to ..

This is a rigid 300mm stainless-steel rule with dual metric and imperial graduations etched along bo..

This is a 30-litre (1/2 cu.ft) cylindrical steel measure with two carrying handles, calibrated to a ..

This is a complete vibrating-table relative-density apparatus for cohesionless soils (ASTM D4253/D42..

This is a 1-litre, plated-steel Proctor compaction mould with an internal diameter and height matchi..

This hand-operated 2.49kg drop hammer has a tamping face that slides inside a guide sleeve so the ma..

This is the heavier counterpart rammer at 4.535kg mass with the drop height extended to 457.2mm, use..

This electric vibrating (Kango-type) hammer clamps into a rigid steel support frame above a mould, w..

This is a vibrating compaction hammer used to compact Proctor and CBR soil specimens, and, fitted wi..

This is a larger-diameter (152.4mm) plated-steel compaction mould assembly with wing-nut clamped ext..

This is an ASTM-standard split CBR mould, 152.4mm diameter x 178mm high, supplied complete with a pe..