The CTM-02 is an automatic electrical CBR (California Bearing Ratio) loading machine with servo-moto..

This is a machined cylindrical metal container, H=152mm x Dia=152mm, of known, precisely machined vo..

This is a galvanized steel deep cement mixing pan, 18in x 18in x 3in deep, used for mixing cement/mo..

The DHG-9240B is a forced-convection drying/heating oven with a 240-litre chamber, ambient+10C to 30..

The DHG-9240B is a forced-convection lab oven with a 0.225 cubic-metre chamber, thermostatically con..

This is a thermostatically controlled electric drying oven with a 240-litre (0.225 m3) chamber, main..

This is a heavy-duty clear rectangular glass dish, roughly 2.2 litre capacity (260x220x65mm) with re..

This larger calibrating can, 200mm diameter x 250mm deep, is used with the 215mm sand-pouring cylind..

This is the same type of portable dial thermometer as the standard model, but fitted with a long 0.7..

This dial-gauge cone penetrometer mounts on a stand with a magnetically released plunger and a digit..

This is a ground steel straightedge, 300mm (12in) long with a bevelled working edge, used to strike ..

This matching dustpan-and-hand-brush set has a rubber lip edge for a tight seal against floors and w..

The TRL DCP (Dynamic Cone Penetrometer) is an instrument designed for the rapid insitu measurement o..

This is the EDC-1, a floor-standing automatic CBR/Proctor compaction press with 50 tonnes capacity, ..

The EDC-3A is an automatic electric Marshall compaction machine with hammer and pedestal, forming as..

The EDC-3A is an automatic compaction hammer with dual hammer weights and a 457mm drop height, formi..

The EDG-1S is a portable, battery-powered electrical soil density gauge that measures dry density, p..

The EDG-S200 is a non-nuclear electronic soil density/moisture gauge (a Troxler-type alternative), g..

This is a complete motorized steel-drum Los Angeles Abrasion machine with all accessories, tumbling ..

Extension rods: 400 mm, dia. 16mm