-
Material Testing
- Aggregate
- Aggregate and Chippings
- Aggregate Crushing Value Test (BS 812)
- Bitumen
- Bitumen Extraction Extractor Bottle Method (BS 598)
- Bitumen Spray Test (BS 1707)
- CBR (AASHTO T193)
- Compaction Test (AASHTO T99 & T180)
- Concrete
- Concrete Cube Compression Testing
- Concrete Slump and Cube Manufacture (BS 1881)
- Consumables & Sundries
- Density - Nuclear Density Method (AASHTO T238)
- Density - Sand Replacement Method (Bs1377)
- Drying, Weighing & Grading
- Flakiness (BS 812)
- General Equipment
- Los Angeles Abrasion Test
- Marshall Test (ASTM D1570 6 1559)
- Maximum S.G. of Bituminous Paving Mixtures (ASTM D2041)
- Miscellaneous Equipment & Reagents
- Others
- Quantitative Extraction of Bitumen from Bituminous Mixtures (ASTM D2172 & D95)
- Recovery of Bitumen from Solution
- Relative Density of Aggregates (BS 812)
- Sieve Analysis (BS 1377 & ASTM)
- Soil
- Standard Specifications (Latest Editions)
- Metal Detectors
- NDT Test Equipment
- Water Testing
Your quote request is empty!
Material Testing
-
Aggregate (1)
-
Aggregate and Chippings (9)
-
Aggregate Crushing Value Test (BS 812) (10)
-
Bitumen (1)
-
Bitumen Extraction Extractor Bottle Method (BS 598) (1)
-
Bitumen Spray Test (BS 1707) (11)
-
CBR (AASHTO T193) (61)
-
Compaction Test (AASHTO T99 & T180) (45)
-
Concrete (2)
-
Concrete Cube Compression Testing (7)
-
Concrete Slump and Cube Manufacture (BS 1881) (20)
-
Consumables & Sundries (76)
-
Density - Nuclear Density Method (AASHTO T238) (6)
-
Density - Sand Replacement Method (Bs1377) (34)
-
Drying, Weighing & Grading (2)
-
Flakiness (BS 812) (17)
-
General Equipment (92)
-
Los Angeles Abrasion Test (4)
-
Marshall Test (ASTM D1570 6 1559) (53)
-
Maximum S.G. of Bituminous Paving Mixtures (ASTM D2041) (1)
-
Miscellaneous Equipment & Reagents (66)
-
Others (57)
-
Quantitative Extraction of Bitumen from Bituminous Mixtures (ASTM D2172 & D95) (21)
-
Recovery of Bitumen from Solution (14)
-
Relative Density of Aggregates (BS 812) (11)
-
Sieve Analysis (BS 1377 & ASTM) (138)
-
Soil (166)
-
Standard Specifications (Latest Editions) (34)
TIAN Pocket Calculator, Scientific
This is a compact battery/solar-powered scientific calculator with a two-line display, supporting tr..
TIAN Pocket thermometer + 50°C to +250°C accurate to ± 3% with 0.1 m stem
This is a compact pocket-style dial thermometer with a short 0.1m probe stem and clip, covering +50C..
TIAN Point Brush 20-50 mm 5cm
This is a point brush in the 20-50mm range (5cm), used for fine marking and touch-up work in the lab..
TIAN Point Brush 5-10 mm 7mm
This is a round-tip point brush, 20-50mm (5cm), used for fine marking, touch-up painting, and applyi..
TIAN Polythene or glass 20 litres storage vessel with tap at bottom
This is a 20-litre rigid storage vessel with a screw-down tap at the base, used for holding and disp..
TIAN Polythene wash bottle (500 ml)
This is a 500ml polyethylene squeeze wash bottle with an integrated dispensing nozzle and screw cap,..
TIAN Portable dial thermometer + 50°C to +250°C accurate to ± 3%
This is a portable dial thermometer reading +50C to +250C with roughly +/-3% accuracy, used for spot..
TIAN Portable Platform Scale 30kg,0.1g
This is a digital portable platform scale, 30kg capacity with 0.1g readability, with a stainless-ste..
TIAN Primus gas stove
This portable single-burner gas stove is used in the field to dry soil samples for rapid moisture-co..
TIAN Procter Mould ( 1 Liter)
This is a 1-litre capacity Proctor compaction mould in plated steel, with a clamped detachable basep..
TIAN Procter Rammer (2.5 Kg)
This is a manual standard Proctor compaction rammer with a 2.5kg sliding weight inside a vented stee..
TIAN Proving ring for above, 10 kN capacity
This 10kN capacity proving ring is used for lower-strength/soft subgrade specimens where finer load ..
TIAN Proving ring for above, 28 kN capacity
This 28kN capacity proving ring is used for mid-range load measurement on the CBR frame.
TIAN Proving ring for the above of 50 Kn capacity
This is a 50kN capacity proving (load) ring, a calibrated steel ring with internal dial indicator us..
TIAN Pycnometer of 1 litre capacity
This 1-litre pycnometer is fitted with a watertight conical screw top pierced by a small apex hole, ..
TIAN QL1-C Moisture content tins, 75 mm dia, Cadmium or aluminium plated
This is a shallow, lidded spun-metal moisture tin around 75mm diameter, cadmium or aluminium plated,..
TIAN Quality of Water Test, Complete Set
This is a complete colorimetric water-quality test kit for assessing concrete mixing water per EN 10..
TIAN Rain gauge
This is a plastic rain gauge with a graduated collecting funnel and measuring cylinder for recording..
TIAN Rapidograph Lettering Set
This is a Rapidograph-style lettering set of technical ink pens with fine, fixed-width stainless-ste..
TIAN Refuse Bin capacity optional: 30L
This is a moulded plastic waste bin, 30 litre capacity option, used for general site or office refus..
